Sig P320 M18 Red Dot Installation: A Step-by-Step Guide
Installing a red dot sight on your Sig P320 M18 can enhance your shooting experience and improve accuracy. However, the process can be intimidating if you’re new to firearm modifications. In this article, we’ll walk you through the process of installing a red dot sight on your Sig P320 M18.
Tip 1: Choose the Right Red Dot Sight
Before you start the installation process, it’s essential to choose the right red dot sight for your Sig P320 M18. Consider factors such as the size, weight, and durability of the sight. Some popular options include the Leupold DeltaPoint Pro, the Trijicon RMR, and the Holosun HS503G.
Key Features to Consider:
- Size: Compact sights like the Leupold DeltaPoint Pro are ideal for concealed carry, while larger sights like the Trijicon RMR offer a wider field of view.
- Weight: Lighter sights like the Holosun HS503G won’t affect the balance of your firearm.
- Durability: Look for sights with a rugged design and high-quality materials.
Tip 2: Prepare Your Firearm
Before you start the installation process, make sure your Sig P320 M18 is unloaded and safe to work on.
Steps to Prepare Your Firearm:
- Remove the magazine and clear the chamber.
- Verify that the firearm is unloaded by visually inspecting the chamber and magazine well.
- Remove any accessories, such as holsters or light mounts.
Tip 3: Remove the Rear Sight
The rear sight on your Sig P320 M18 needs to be removed to make way for the red dot sight.
Steps to Remove the Rear Sight:
- Use a sight pusher or a flathead screwdriver to gently pry the rear sight off the slide.
- Be careful not to scratch the slide or damage the sight.
- Set the rear sight aside for reinstallation later.
Tip 4: Install the Red Dot Sight Mount
The red dot sight mount is a critical component that attaches the sight to your firearm.
Steps to Install the Red Dot Sight Mount:
- Apply a small amount of threadlocker to the mount’s screws.
- Align the mount with the slide’s dovetail and gently tap it into place.
- Use a screwdriver to secure the mount to the slide.
Tip 5: Install the Red Dot Sight
Now it’s time to install the red dot sight onto the mount.
Steps to Install the Red Dot Sight:
- Align the sight with the mount and gently push it into place.
- Use the sight’s screws to secure it to the mount.
- Tighten the screws firmly, but avoid over-tightening.
Tip 6: Reinstall the Rear Sight (Optional)
If you want to maintain the ability to use your iron sights, you can reinstall the rear sight.
Steps to Reinstall the Rear Sight:
- Apply a small amount of threadlocker to the sight’s screws.
- Align the sight with the slide’s dovetail and gently tap it into place.
- Use a screwdriver to secure the sight to the slide.
Tip 7: Test and Zero Your Red Dot Sight
The final step is to test and zero your red dot sight.
Steps to Test and Zero Your Red Dot Sight:
- Load your firearm and test the sight’s functionality.
- Adjust the sight’s windage and elevation to zero it in.
- Verify that the sight is securely attached to the mount.
🔧 Note: Always follow proper safety procedures when working with firearms. If you're unsure about any part of the installation process, consider consulting a professional gunsmith.
Common Issues and Troubleshooting
| Issue | Solution |
|---|---|
| Sight won’t fit on the mount | Verify that the sight and mount are compatible. Consult the manufacturer’s instructions for guidance. |
| Sight is not securely attached | Check that the sight’s screws are tightened firmly. Consider applying threadlocker for added security. |
| Sight is not zeroing in | Verify that the sight’s windage and elevation adjustments are functioning properly. Consult the manufacturer’s instructions for guidance. |
To get the most out of your Sig P320 M18, it’s essential to properly install and maintain your red dot sight. By following these 7 tips, you’ll be able to enhance your shooting experience and improve accuracy. Remember to always follow proper safety procedures when working with firearms, and consider consulting a professional gunsmith if you’re unsure about any part of the installation process.
What is the best red dot sight for my Sig P320 M18?
+
The best red dot sight for your Sig P320 M18 depends on your specific needs and preferences. Consider factors such as size, weight, and durability when choosing a sight. Popular options include the Leupold DeltaPoint Pro, the Trijicon RMR, and the Holosun HS503G.
Can I install a red dot sight on my Sig P320 M18 myself?
+
Yes, you can install a red dot sight on your Sig P320 M18 yourself, but it’s recommended that you have some experience with firearm modifications. If you’re unsure about any part of the installation process, consider consulting a professional gunsmith.
How do I zero in my red dot sight?
+
To zero in your red dot sight, start by adjusting the windage and elevation to get the sight’s dot centered on your target. Then, fire a few rounds to verify that the sight is accurately aligned. Make any necessary adjustments to the windage and elevation to zero in the sight.
Related Terms:
- Sig M18 red dot footprint
- Sig M18 red dot compatibility
- Sig Sauer P320 M18 sight
