Introduction to Glock Extractor Issues
The Glock pistol is a popular choice among firearm enthusiasts, known for its reliability and durability. However, like any mechanical device, it’s not immune to issues. One common problem that Glock owners may encounter is an extractor that refuses to stay in place. In this article, we’ll explore the possible causes of this issue and provide a step-by-step guide on how to fix a Glock extractor that won’t stay.
Causes of a Glock Extractor Not Staying
Before we dive into the solutions, it’s essential to understand the possible causes of the problem. Here are a few reasons why your Glock extractor might not be staying:
- Worn or damaged extractor: Over time, the extractor can wear out or become damaged, causing it to malfunction.
- Improperly installed extractor: If the extractor is not installed correctly, it may not function as intended.
- Dirty or corroded extractor: A dirty or corroded extractor can prevent it from moving freely and staying in place.
- Weak or broken extractor spring: The extractor spring is responsible for keeping the extractor in place. If it’s weak or broken, the extractor may not stay.
- Incorrectly adjusted extractor: If the extractor is not adjusted correctly, it may not function as intended.
Method 1: Clean and Inspect the Extractor
The first step in fixing a Glock extractor that won’t stay is to clean and inspect it. Follow these steps:
- Remove the slide from the frame and take out the extractor.
- Clean the extractor and surrounding area with a soft brush and solvent.
- Inspect the extractor for any signs of wear or damage. If it’s damaged, you may need to replace it.
- Reassemble the slide and test the extractor.
🔧 Note: Make sure to handle the extractor with care, as it's a delicate component.
Method 2: Adjust the Extractor
If cleaning and inspecting the extractor doesn’t solve the issue, try adjusting it. Here’s how:
- Remove the slide from the frame and take out the extractor.
- Locate the extractor adjustment screw. Turn it clockwise to tighten the extractor or counterclockwise to loosen it.
- Test the extractor by cycling the slide. If it still doesn’t stay, adjust the screw further and test again.
🔧 Note: Be careful not to overtighten the extractor, as this can cause more problems.
Method 3: Replace the Extractor Spring
If the extractor spring is weak or broken, it may not be able to keep the extractor in place. To replace the spring, follow these steps:
- Remove the slide from the frame and take out the extractor.
- Locate the extractor spring and remove it.
- Install a new extractor spring and test the extractor.
🔧 Note: Make sure to purchase a replacement spring from a reputable dealer to ensure compatibility.
Method 4: Replace the Extractor
If the extractor is damaged or worn out, it may need to be replaced. Here’s how:
- Remove the slide from the frame and take out the extractor.
- Purchase a replacement extractor from a reputable dealer.
- Install the new extractor and test it.
🔧 Note: Make sure to follow the manufacturer's instructions for installing a new extractor.
Method 5: Take It to a Gunsmith
If none of the above methods solve the issue, it’s time to take your Glock to a professional gunsmith. A gunsmith can diagnose the problem and perform any necessary repairs or replacements.
Table: Glock Extractor Troubleshooting
| Symptom | Possible Cause | Solution |
|---|---|---|
| Extractor not staying | Worn or damaged extractor | Replace extractor |
| Extractor not staying | Improperly installed extractor | Reinstall extractor |
| Extractor not staying | Dirty or corroded extractor | Clean and inspect extractor |
| Extractor not staying | Weak or broken extractor spring | Replace extractor spring |
| Extractor not staying | Incorrectly adjusted extractor | Adjust extractor |
🔧 Note: This table is for troubleshooting purposes only. Consult a gunsmith or the manufacturer's instructions for specific guidance.
In conclusion, a Glock extractor that won’t stay can be a frustrating issue. However, by following the methods outlined above, you can diagnose and fix the problem. Remember to always handle firearms with care and follow proper safety protocols.
What is the most common cause of a Glock extractor not staying?
+
The most common cause of a Glock extractor not staying is a worn or damaged extractor.
Can I replace the extractor spring myself?
+
What is the best way to clean and inspect the extractor?
+
The best way to clean and inspect the extractor is to use a soft brush and solvent. Make sure to handle the extractor with care, as it’s a delicate component.
Related Terms:
- Glock extractor replacement
- Glock 17 ejector upgrade
- Glock ejector upgrade
- Glock 44 extractor
- Glock EDP
- Glock extractor stuck
